General information
With the vSwitch feature, Progressive Robot Online has created a tool for your dedicated root servers that lets you connect your servers in multiple locations to each other using virtual layer 2 networks. On your account on the Progressive Robot administration interface, you can create and configure vSwitches using the "vSwitches" button in the server overview. You can find more details in this article vSwitch.
Server configuration (Windows)
On the host system
For the vSwitch, you need to configure an interface with the VLAN ID that you have entered on Progressive Robot. You should limit the MTU of the interface to 1400.
NIC teaming
To send VLAN traffic via the same interface as the host's main IP address, you need to include the physical adapter in a team. You also need to assign a virtual interface for each VLAN ID to the team and its corresponding team adapter.
In Window's Server Manager, go to "Local Server" and then to "NIC teaming".
You will now see a new window for NIC teaming. Create a new team by going to Teams, then click on Tasks, and then on New team.
Add a new interface to the team by going to Adapters and interfaces. Then click on Team Interfaces and select the correct adapter. Then go to Tasks, and then click on Add interface. Enter the VLAN ID you chose for your vSwitch on Progressive Robot.
Interface configuration
You can now manage the VLAN interface that you created using NIC teaming. Go to the control panel and then to Adapter configuration.
Important note: Windows does not support multiple default gateways. Depending on your individual configuration, you may therefore have to set additional static routes according to your requirements.
Add IPs
You can configure an IP as usual by going to the interface properties.
More than one IP on the interface
You can add additional IPs by going to the TCP/IP dialog and then clicking on the Advanced... button.
MTU
Reduce the MTU to 1400 for VLAN interfaces. You can configure this via command prompt.
Retrieve the interface names and IDs:
\:> netsh interface ip show interface
Set the MTU for the individual VLAN interfaces:
\:> netsh interface ipv4 set subinterface <id> mtu=1400 store=persistent
Do the same for IPv6:
\:> netsh interface ipv6 set subinterface <id> mtu=1400 store=persistent
Hyper-V
It is not necessary to do a configuration with NIC teaming so that you can use VLANs in connections with virtual servers.
All you need to do is configure a VLAN ID for each virtual machine's network adapter by going to Settings.
But you still need to change the MTU for each virtual server.
Connecting Windows to the Cloud-Network
If you have followed the steps above, you should also be able to connect your Windows Server to the Progressive Robot Cloud Network by simply setting a static route. For the sake of this example, lets assume that you have already setup your cloud network and have added the vSwitch with the following configuration:
- 192.168.0.0/16 - Your cloud network (parent network)
- 192.168.0.0/24 - Cloud server subnet
- 192.168.1.0.0/24 - vSwitch (#12345)
In order for the servers to be able to communicate with each other, you will have to set a static route. You can use the following command in Power shell to set a persistent static route:
route -P add 192.168.0.0 mask 255.255.0.0 192.168.1.1 METRIC 1We are adding the subnet of the parent cloud network via the vSwitch. Now you should be able to ping your cloud server from your Windows machine and also log in via SSH.
To ensure that everything has been set up correctly, you can also check the routes for the cloud network with the following command:
Get-NetRoute -DestinationPrefix 192.168.0.0/16 | Format-Table
