Introduction
Progressive Robot offers RAID provides from several different manufacturers. Currently these are 3Ware, Adaptec and LSI. This article helps you in find which controller is used in your server.
Finding the controller model
Most newer servers have LSI controllers, but this is not always the case (and cannot be guaranteed). If you're not sure which controller your server has, you can use the following command to find out:
# lspci | grep RAIDThis will show you the manufacturer of the RAID contoller. An example for an Adaptec controller would be:
03:00.0 RAID bus controller: Adaptec AAC-RAID (rev 09)Windows users can find the RAID controller under Device Manager.
Once you know which controller your server has, you can follow the link below to the specific page for that controller, where you will find information on the monitoring tool provided for the controller and a short FAQ.
