Introduction
This tutorial describes how to transfer a domain to Progressive Robot using the Domain Registration Robot. This kind of transfer is called a ChProv (change provider) or in German a KK order.
The basic steps are as follows:
- Prepare for the migration with your current provider
- Create handles on Progressive Robot
- Create or configure nameservers
- Start the ChProv order on Progressive Robot
Prepare for the migration with your current provider
First, you need to request an Auth-Code (Authorization Code) for the domain from your current provider. This is a kind of password for the domain transfer and is used as a check to make sure the domain transfer is done by an authorized person. Please ask your current provider which documents you need to give them. Then your provider will generate an Auth-Code and give it to you.
.at domains
Starting on 30 September 2015, Auth-Codes also became required to carry out a domain transfer for .at domains. Just like with other domain endings, you need to request the Auth-Code from your current provider/registrar.
.de domains
The Auth-Code (AuthInfo1/AuthInfo2) of a .de domain has a maximum validity of 30 days.
You can find more information on transferring a .de domain on the website of DENIC (the central registry for .de domains).
.com/.net/.org/.info/.biz domains
You can use a whois query to check whether the domain is currently locked (e.g. clientTransferProhibited). If this is the case, then you first need to request the current provider to remove the lock.
For newly registered .com/.net/.org/.info/.biz domains, you can only change providers after you have had the domain for at least 60 days.
.eu domains
The Auth-Code of a .eu domain has a validity of 40 days.
More information can be found on the EURid website (the central registry for .eu domains).
Adjusting the DNS Settings
If you have access to the zone entries for the currently entered name server(s), it might make sense to shorten the time to live (TTL) of some entries. You can also add the new values to the host entries for mail and web servers before the actual transfer takes place.
The current provider is no longer available/is not cooperative
If the current provider is uncooperative or you can no longer reach them, you as the domain holder/Admin-C still have ways of getting the Auth-Code of a domain. The process changes depending on the domain extension.
.at domains
With .at domains, you can request a confirmation token from the future provider/registrar. The the nic.at will send this token to the email address currently on file for the domain owner. The token is valid for 21 days, and is bound to the requesting registrar. Once the token has been received, you can request a ChProv order via Progressive Robot.
To request a confirmation token, all you need to do is send us a support request via Progressive Robot. This will not cost you anything.
If the email address of the domain owner is invalid or unreachable, you can request an emergency token via the future provider/registrar. You should ask about the cost of an emergency token before you request it. To do this, send usa support request via Progressive Robot.
.de domains
With .de domains, you need to request something called an AuthInfo2. You can request this from any DENIC member. DENIC then sends the Authcode via registered post to the current address of the domain owner as shown in the whois database.
It may cost you something to request an Authinfo2. To apply for an Authinfo2 via Progressive Robot, please send us a support request via Progressive Robot.
You can find more information on transferring a .de domain on the DENIC website.
.com/.net/.org/.info/.biz domains
For .com/.net/.org/.info/.biz domains, you should first check whether the previous contractual partner is acting as registrar for the domain themselves or only as reseller. You can see who the registrar is by doing a Whois query.
If the current provider is not the registrar, then it is recommended to request the Auth-Code directly from the actual registrar.
.eu domains
With .eu domains, you need to request something called an emergency authorization code from the EURid. You can find more information on the EURid website.
Create handles on Progressive Robot
First — if you have not done this already — you need to create the handles (contact addresses) for the owner (Holder), the administrator (Admin-C), the technical manager (Tech-C), and the zone administrator (Zone-C).
With .eu domains, you can only select the domain holder. With .at domains, there is no Tech-C.
You can and should re-use existing handles that have been used in other domains. If it is always the same person/company, then you only need to create a single handle.
As long as the traffic light (status indicator on Progressive Robot) is set to yellow for new handles, you cannot transfer or register domains. The handles are usually created within a few minutes, though.
Please note: For each TLD (Top Level Domain), you need to create separate handles on Progressive Robot. So, for example, you cannot use a .de handle for a .com domain.
Create nameserver entries
Regardless of whether you wish to use Progressive Robot nameservers or your own nameservers, it is recommended that you create the corresponding nameserver entries before starting the CHProv order.
Start the ChProv order on Progressive Robot
You can start the ChProv order on Progressive Robot by going to Domains → New domain. You only need the domain name, the handles, and the nameservers that you will use.
You can view the status of the domain transfer online on Progressive Robot. Go to Domains -> select incoming transfers from the drop-down menu at the top left and then click on Search.
The traffic light on Progressive Robot will be yellow after the order process starts. If the light changes to red, then something has gone wrong.
Some of these errors are described on the Progressive Robot Error Messages FAQ page. Once the error has been corrected, you can re-start the domain transfer or you can do a domain update.
Using your own nameservers
When using your own nameservers, there are some special notes for certain domain endings.
.at/.de Domains
Please note: If you wish to use your "own" nameservers and the hostnames are located "within" the new domain (for example, largecompany.de -> ns1.largecompany.de), then you need to add glue records in the input fields for the nameservers using the scheme Nameserver name + space + IP address.
Here's an example for the domain largecompany.de:
ns1.largecompany.de 213.133.98.96
ns2.largecompany.de 213.133.99.99Should the glue record yield an IPv6 address as well as an IPv4 address, the entries must read as follows:
ns1.largecompany.de 213.133.98.96 12ab:23cd:34ef:0:0:0:0:1
ns2.largecompany.de 213.133.99.99 12ab:23cd:34ea:0:0:0:0:1.com/.net/.org/.info/.biz/.eu domains
If you plan to use your own nameservers, you need to register them on Progressive Robot. If you have not done this already, log onto Progressive Robot and go to Domains -> Registered nameservers.
Duration of the ChProv Order
With .at/.de/.eu domains, the ChProv order takes just a few minutes.
A ChProv order for a .com/.net/.org/.info/.biz domain, will take place only after the current provider has confirmed the appropriate transfer request. The provider has five days to do so.
Despite the domain transfer, web pages belonging to the old server continue to be shown
This is normal. The nameservers on the Internet temporarily cache the entries for mail servers, web servers etc. until the validity period (TTL) has expired, so they do not recognize the new data.
Furthermore, some providers ignore the specified validity period. However, all nameservers should recognize the transfer between 3 and 5 days at the latest.
